Check before starting the generator
1. Fuel inspection
Check the fuel pipe joints for looseness and leakage. Make sure fuel is supplied to the engine. And exceeds 2/3 of full scale.
2. Lubrication system (check engine oil)
Check the engine crankcase oil level and keep the oil level between the "ADD" and "FULL" marks on the "engine stop" side of the oil dipstick.
3. Antifreeze level check.
4. Check the battery voltage.
There is no battery leakage and the battery voltage is 25-28V.
5. Water jacket electric heating temperature 30℃-90℃.
6. The generator output switch is closed.
7. Load the load:
Close the generator output switch after the water temperature on the panel shows about 60°C.